Epitalon usage and effects

Status
Not open for further replies.
Mine is clear. Was is new BAC? What kind? Does is clear at room temps? You shouldn't need AA with this peptide.
 
Chili777 said:
Mine is clear. Was is new BAC? What kind? Does is clear at room temps? You shouldn't need AA with this peptide.
Freshly opened Hospira. I can let it sit at room temp and see. Bummed 🫤
 
Yeah. Not a good sign if it stays that way. That is a low amount of BAC at just 1 unit per mg, also. If it stays cloudy, I'd double it if you have room, or break it out to another pen, if you have one. I did 10 mg to 4 ml of BAC.
 
Sara360 said:
View attachment 12205
That doesn't even look reconstituted. You may need to dilute it a lot more.

What dosage are you trying to get?
 
I used a reconstitution calculator but obviously didn’t do it correctly. I’ve only reconstituted 60 mg Tirz and that’s been spot on. See, I need the Epithalon for my brain health 🤣. I really appreciate your help. It did look like it was on low side with liquid. Your the best!
 
Sara360 said:
I used a reconstitution calculator but obviously didn’t do it correctly. I’ve only reconstituted 60 mg Tirz and that’s been spot on. See, I need the Epithalon for my brain health 🤣. I really appreciate your help. It did look like it was on low side with liquid. Your the best!
OK. You can still salvage that if it's not bad. Here is the one I use: https://peptidescalculator.com/
 
Sara360 said:
I reconstituted (4) 10mg vials Epithalon with each 40 units brand new Hospira bac water yesterday. It was kind of cloudy. I transferred it to a sterilized pen carpual and let it sit in the fridge but it looks like milk. Has anyone else had this happen? I read somewhere that maybe there wasn’t enough bac water or it needed acetic acid? Or it’s just bad and I need to toss it? I’ve never used it before so just checking with others that have.
I use 30 % acetic acid and the rest bac in mine. Try adding some of it.
 
CNCCurrency said:
I use 30 % acetic acid and the rest bac in mine. Try adding some of it.
In Epitalon? I've never seen that or read that the pH needed adjusting. Maybe for a really large recon?
 
Chili777 said:
In Epitalon? I've never seen that or read that the pH needed adjusting. Maybe for a really large
I have 50 mg vials, I believe the acetic acid ph is 4.
 
cheaperseeker said:
I agree that you probably need more bac water. Try adding at least another 1 mL (100 units), maybe more, and see if it clears up.
I added another 140 units which made it a total of 3 mL and it is crystal clear! The peptide calculator Chili777 tagged is much better than what I was using.
 
Chili777 said:
Hey PA, I read that the old protocol specified 10 mg a day, but some researchers found that this was based on the older peptide that was used in the Russian study which was actually Epithalamin, not Epitalon, which is 10x stronger. I've heard accounts where people really got their butts kicked at that dosage. My order comes next week and I'm going to use it IN instead of subq since it's small enough to pass the BBB and be absorbed easily. I got some Snoot bottles that deliver 0.1 ML per spray. We'll see what happens. Here is a link to what is considered current info and protocol for Epitalon: https://pep-pedia.org/peptides/epitalon
Thx for all that info, very useful. Do you have a source for Snoot bottles? Do you think you’d deliver the same dose intrasnoot as pinned?
 
Labcat said:
Thx for all that info, very useful. Do you have a source for Snoot bottles? Do you think you’d deliver the same dose intrasnoot as pinned?
This is my post on what I did to recon them for IN, with links:

Selank + Semax--nasal? Effects?

Hi all. Wanting to start researching with Selank and Semax. Anyone here use them nasally? How do you dose them? Do you mix them into a commercial nasal spray brand? Would love some info. TIA

glp1forum.com

IN dosage is typically higher that SQ. I use this site for reference as I've found it to be more up to date on the various protocols. https://pep-pedia.org/peptides/epitalon
 
Chili777 said:
This is my post on what I did to recon them for IN, with links:

Selank + Semax--nasal? Effects?

Hi all. Wanting to start researching with Selank and Semax. Anyone here use them nasally? How do you dose them? Do you mix them into a commercial nasal spray brand? Would love some info. TIA

glp1forum.com

IN dosage is typically higher that SQ. I use this site for reference as I've found it to be more up to date on the various protocols. https://pep-pedia.org/peptides/epitalon
Thank you for the useful info! Really appreciate it!
 
I'm on day two of epitalon, 1mg a day. I swore I would finish out the nad+/SS-31/Mots-C mitochondria protocol and my klow cycle BEFORE I tried anything else, and then it arrived earlier than I thought it would and I disregarded my plan.

I slept like the dead last night, and am about to drop off asleep as we speak, instead of staying awake til 1 am doomscrolling. Could be placebo and probably is. Don't care, tired of being tired.
 
randompersonrandom said:
I'm on day two of epitalon, 1mg a day. I swore I would finish out the nad+/SS-31/Mots-C mitochondria protocol and my klow cycle BEFORE I tried anything else, and then it arrived earlier than I thought it would and I disregarded my plan.

I slept like the dead last night, and am about to drop off asleep as we speak, instead of staying awake til 1 am doomscrolling. Could be placebo and probably is. Don't care, tired of being tired.
That's awesome. And I'm holding off on SS-31 and Mots-C until I finish Epitalon! 😆
 
If you want guaranteed feels, take steroids and stimulants.

Otherwise, take peptides:

 
Status
Not open for further replies.

Trending content

Members online

No members online now.

Forum statistics

Threads
2,620
Messages
55,146
Members
1
Latest member
Admin
Back
Top