3D print Magnetic Needle Guide assist for insulin / GLP-1

[DjJoshua]

Found this on makerworld.com Maybe some of our 3D printer people could use this?

https://makerworld.com/en/models/1688373-magnetic-needle-guide-assist-for-insulin-glp-1?from=recommend#profileId-1800447

 

[byefatlicia]

I have trouble finding the middle of the vials with the needle when I can't find my readers... It would be cool to have a shoe horn thingy for that

 

[SupremeZZ]

At first I was like why but this is actually very nice and beginner friendly. I wish my mom could've started with something like this.

 

[DjJoshua]

At first I was like why but this is actually very nice and beginner friendly. I wish my mom could've started with something like this.

I hope it helps someone

 

[DjJoshua]

I have trouble finding the middle of the vials with the needle when I can't find my readers... It would be cool to have a shoe horn thingy for that

Like this??

https://makerworld.com/en/models/2258788-5ml-syringe-3ml-vial-guide?from=search#profileId-2462369

https://makerworld.com/en/models/778870-hypodermic-syringe-jig?from=search#profileId-715732

 

[byefatlicia]

Like this??

https://makerworld.com/en/models/2258788-5ml-syringe-3ml-vial-guide?from=search#profileId-2462369

https://makerworld.com/en/models/778870-hypodermic-syringe-jig?from=search#profileId-715732

Just like that! Now I gotta find one for sale or buy a 3d printer

 

[byefatlicia]

Like this??

https://makerworld.com/en/models/2258788-5ml-syringe-3ml-vial-guide?from=search#profileId-2462369

https://makerworld.com/en/models/778870-hypodermic-syringe-jig?from=search#profileId-715732

Look what I just found

https://www.etsy.com/listing/1795081847/syringe-guide-reusable-peptide-vial?ls=s&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=syringe+jig&ref=sr_gallery-1-25&pro=1&sts=1&content_source=474965b4-0f7d-404f-8f13-06ebd9488448%253ALT3ca37638f8224fa2a3982d3180d1deddab875776&organic_search_click=1&logging_key=474965b4-0f7d-404f-8f13-06ebd9488448%3ALT3ca37638f8224fa2a3982d3180d1deddab875776

 

[DjJoshua]

Just like that! Now I gotta find one for sale or buy a 3d printer

lol well drive up from AZ and visit Zion national park.. im about 30 min from there and ill print one off for you lol...

 

[DjJoshua]

Look what I just found

https://www.etsy.com/listing/1795081847/syringe-guide-reusable-peptide-vial?ls=s&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=syringe+jig&ref=sr_gallery-1-25&pro=1&sts=1&content_source=474965b4-0f7d-404f-8f13-06ebd9488448%253ALT3ca37638f8224fa2a3982d3180d1deddab875776&organic_search_click=1&logging_key=474965b4-0f7d-404f-8f13-06ebd9488448%3ALT3ca37638f8224fa2a3982d3180d1deddab875776

sweet , there you go. and for $9.69 and no need to visit Zion.

 

[byefatlicia]

Thanks for the invite tho Utah is beautiful

 

[yrrdead]

Thanks for the invite tho Utah is beautiful

If you didn't see my previous post , many public libraries offer 3d printing services. For much less than Etsy and can go get it tomorrow.

 

[Ruckus4519]

If you didn't see my previous post , many public libraries offer 3d printing services. For much less than Etsy and can go get it tomorrow.

I've seen the printers around, and you made me go check what's the set up. I think my local one is free to use actually. Limited to only a few hours though. Not sure if that's enough. I haven't really gotten into the hobby.

I assume I'll have to look up the models of their machines and the model provided and do some maths or something

 

[DjJoshua]

Thanks for the invite tho Utah is beautiful

I've seen the printers around, and you made me go check what's the set up. I think my local one is free to use actually. Limited to only a few hours though. Not sure if that's enough. I haven't really gotten into the hobby.

I assume I'll have to look up the models of their machines and the model provided and do some maths or something

Jump on youtube and look at a few video on how to 3D print / using slicers etc. That 3d print with out the moving parts should take around 1-2 ish hours to print.

 

[byefatlicia]

Jump on youtube and look at a few video on how to 3D print / using slicers etc. That 3d print with out the moving parts should take around 1-2 ish hours to print.

I'm gonna hafta get one of these. I already know it. It'll be ANOTHER obsession I'm pretty sure.

 

[DjJoshua]

I'm gonna hafta get one of these. I already know it. It'll be ANOTHER obsession I'm pretty sure.

Just keep an eye out on sales, like on Amazon. with in Amazon I use a product tracker when the price hits a set range I get a e-mail.

 

[Jerrey]

I'm gonna hafta get one of these. I already know it. It'll be ANOTHER obsession I'm pretty sure.

Oh god be careful. You will end up with 2 printers wearing in the background 24/7, while your eyeing a third to do really big footprint models, and a closet full of filament of every type and color of the rainbow.

Don't ask how I know!!!!

 

[DjJoshua]

I'm gonna hafta get one of these. I already know it. It'll be ANOTHER obsession I'm pretty sure.

You have NO IDEA .....

 

[chunkyTN]

I'm gonna hafta get one of these. I already know it. It'll be ANOTHER obsession I'm pretty sure.

Got my first one at Christmas. I've printed all kinds of things for pep research and some are very handy. You just gotta be ready for all the stuff you'll want on top of the printer. ALL the colors! ALL the types of filament! ALL the failed prints you're gonna throw away.

 

[byefatlicia]

Got my first one at Christmas. I've printed all kinds of things for pep research and some are very handy. You just gotta be ready for all the stuff you'll want on top of the printer. ALL the colors! ALL the types of filament! ALL the failed prints you're gonna throw away.

Which one do you have? Are\nYou still happy that that's the one you bought?

 

[chunkyTN]

Which one do you have? Are\nYou still happy that that's the one you bought?

I got the Flashforge AD5X because I wanted to be able to do multiple colors. So far I love it. The failures I've had can be blamed mostly on cheap silk filaments. That crap breaks so easy and then you have to take apart the print head to get it out.