I havent used the 3d printer since Covid, but this is inspiring me.
Whatcha Printing?
- Thread starter HouseCat
- Start date
- Status
Peptide wise I have prints of the following:
64 count vial containers for hydrapeak 32Oz. Going to need a second set for a powercan I have coming. https://makerworld.com/en/models/22...insert-64-count?from=search#profileId-2536853
3x Silica holder that is 3ml vial shaped for the hydrapeak - https://makerworld.com/en/models/26...d-silica-holder?from=search#profileId-2928979
4 BAC container for my Hospira - https://makerworld.com/en/models/21...-water-cover?from=recommend#profileId-2313433
10 vial storage for the fridge (upcoming vials so I disturb the freezer a lot less) - https://makerworld.com/en/models/2576329-magnetic-peptide-vial-vault-10x-3ml-vials#profileId-2840969
4 vial storage for the fridge (use this for recon vials) - https://makerworld.com/en/models/23...ml-or-4ml-vials?from=search#profileId-2523474
2 pen case (for pens in the fridge) - https://www.printables.com/model/865898-insulin-pen-case
Those are the peptide prints I have done on my Sovol SV08, all in black PETG due to use in fridge/freezer for the most part.
64 count vial containers for hydrapeak 32Oz. Going to need a second set for a powercan I have coming. https://makerworld.com/en/models/22...insert-64-count?from=search#profileId-2536853
3x Silica holder that is 3ml vial shaped for the hydrapeak - https://makerworld.com/en/models/26...d-silica-holder?from=search#profileId-2928979
4 BAC container for my Hospira - https://makerworld.com/en/models/21...-water-cover?from=recommend#profileId-2313433
10 vial storage for the fridge (upcoming vials so I disturb the freezer a lot less) - https://makerworld.com/en/models/2576329-magnetic-peptide-vial-vault-10x-3ml-vials#profileId-2840969
4 vial storage for the fridge (use this for recon vials) - https://makerworld.com/en/models/23...ml-or-4ml-vials?from=search#profileId-2523474
2 pen case (for pens in the fridge) - https://www.printables.com/model/865898-insulin-pen-case
Those are the peptide prints I have done on my Sovol SV08, all in black PETG due to use in fridge/freezer for the most part.
@HouseCat I came home today and seen that my wife printed these can holders today. Its not even Halloween yet???!
Here's a few other things she printed. Hopefully one day I can print something for myself...
I'm working on some CAD stuff.
What software are you using? I use solid works at my job. Thinking about getting fusion 360 for home. Messing around on Tinkercad right now. Definitely cant do much with it compared to the other softwares.BNLFL said:
I rock Fusion myself.
Is it free for personal use or do you have to pay now?Pocket said:
Here is my current set up. I originally only wanted a small open station printer... Just added the second ams. These things are addicting! Once I finish the spare bedroom in the basement, im moving this down there and probably getting another printer (or two). Been looking for some type of sturdy compact bench to put this on. Have it one a old side table right now.
I get it for free since I am an educator.
I just spent a long frustrating time using TinkerCAD. My first time in the CAD space, and man, I am just not patient enough for design!! Printing the project now and keeping my fingers crossed cuz it's a 14hr/300g project.Rosco P. Coltrane said:
Your wife prints AWESOME stuff! She's ready for Halloween, my type of gal! But yes, hopefully you'll be able to print some things too. Looks like she or you picked up some non gray/black filament?
Yes she bought a bunch for herself off Amazon the other day. The problem I have with Tinkercad is that all of the buttons and commands are dang near opposite then the software I use at work. So its starting to throw me off a little lol
But just keep using it and you will get the hang of it. I used chat gpt for a lot of the settings in bambu studio. It really helped me out a lot and saved a bunch of time. Im always changing the settings for stuff that's already programmed. I mainly print in petg so I have to switch it to that instead of pla quite a bit. I cant quite remember.. Did you say that you ended up getting a Bambu p1s?
But just keep using it and you will get the hang of it. I used chat gpt for a lot of the settings in bambu studio. It really helped me out a lot and saved a bunch of time. Im always changing the settings for stuff that's already programmed. I mainly print in petg so I have to switch it to that instead of pla quite a bit. I cant quite remember.. Did you say that you ended up getting a Bambu p1s?
Bambu A1 Combo...I will have no need to go outside the "Bambu universe" with open source anything, cuz even though I'm a fun weirdo, when it comes to 3D printing I'm just a basic bitch!Rosco P. Coltrane said:
I just got my first TPU and PETG from MicroCenter today...I have a massive project coming up and @Pocket gave me some good tips on how to prepare for and use them. I'm excited and nervous since it will be like a 30hr print with the longest leg being over a day. My poor lil Bambi (my printer's name) is gonna get a workout! There have only been 2 days since I got it that it hasn't been cranking out stuff!
I almost bought that one. I been looking for a used a1 or a1 mini for my kids. Im still not quite up to date on the whole open sourced thing. Havent had any issues yet and the bambu app is awesome. Maybe I will be against it more in the future as I learn more.
Do you know if tpu is safe to print indoors? I have somethings I want to make out of that and abs. My printer is in the living room right now so I have to be careful on what material I print. When I move it to the basement, im hoping to add some type of ventilation system.
Do you know if tpu is safe to print indoors? I have somethings I want to make out of that and abs. My printer is in the living room right now so I have to be careful on what material I print. When I move it to the basement, im hoping to add some type of ventilation system.
Best of luck!...I hope your projects turn out awesome!!HouseCat said:
EDIT: and Thank you very much!
I did 3D CAD design work when I was working. Been retired a while now, and zero interested with anything that reminds me of work, including talking about it. I loved the job, made a shitload, but I'm done. I was just busting the girl below ass regarding something.Rosco P. Coltrane said:
HouseCat said:I just spent a long frustrating time using TinkerCAD. My first time in the CAD space, and man, I am just not patient enough for design!! Printing the project now and keeping my fingers crossed cuz it's a 14hr/300g project.
Your wife prints AWESOME stuff! She's ready for Halloween, my type of gal! But yes, hopefully you'll be able to print some things too. Looks like she or you picked up some non gray/black filament?
[Imported image pending local asset: attachments-winking-dog-gif.33439]
- Status
