使用前请测试

[Rodboyjr]

您好，我使用瑞他曲肽的时间不长——之前用的是Zepbound。我目前有一个未开封的6毫克试剂盒，但还没用过，因为我不确定如何确认我这批药是否已经检测过，或者是否需要自己做检测来验证分析证书（COA）。

有人分享了一个STG Telegram群组的链接，但我发现里面内容有点多，不太好用。我一直在努力弄清楚我这批药是否已经有检测结果，如果已经检测过了，我不想再花钱做检测。

我的主要问题是：

如何查看我购买的这批货物是否已经过检测？

我从 Nexaph 订购了一批货——社区里通常用什么缩写来指代这家供应商？

我已经买齐了所有我认为需要的东西（胰岛素注射器、手套、酒精棉片、过滤器、BAC水等等），但我还没开始注射，因为我想百分百确定自己注射的是什么。

我应该自己检测这批产品吗？还是订购一批已经过社区广泛测试和验证的产品会更安全/更好？

非常感谢有经验的朋友能提供任何帮助或指导！谢谢！

另外，我知道二维码显示的是供应商的检测结果，但似乎大多数人都认为这些检测结果不可信。

 

[Skidude]

您好，我使用瑞他曲肽的时间不长——之前用的是Zepbound。我目前有一个未开封的6毫克试剂盒，但还没用过，因为我不确定如何确认我这批药是否已经检测过，或者是否需要自己做检测来验证分析证书（COA）。

有人分享了一个STG Telegram群组的链接，但我发现里面内容有点多，不太好用。我一直在努力弄清楚我这批药是否已经有检测结果，如果已经检测过了，我不想再花钱做检测。

我的主要问题是：

如何查看我购买的这批货物是否已经过检测？

我从 Nexaph 订购了一批货——社区里通常用什么缩写来指代这家供应商？

I’ve already purchased everything I think I need (insulin syringes, gloves, alcohol pads, filters, BAC water, etc.), but I haven’t done any injections yet because I want to be 100% sure of what I’m putting into my body.

Should I test this current batch myself, or would it be safer/better to order a batch that’s already been widely tested and verified by the community?

I’d really appreciate any help or guidance from those with more experience. Thank you!

Also, I know that the QR code shows the vendors test, but it seems to be agreed-upon most people that you can’t trust those test.

Absolutely always question vendor provided testing.

The one caveat would be that on mass tested vendors (those that many users test), especially with the type of packaging that mitigates mistaken product delivery, your risk level is less than ordering from a random, non tested, non labeled.

It is up to you to decide your risk.

That batch is from vendor post test:

Jano from Vendor



This is from 3rd party testing server on SNP/Nexaph site:

Jano Result 3rd party

STG no longer supports/reports on Nexaph



The only way to be 99.9% sure is test it yourself, but it appears to be a reasonable bet that you are good to go.

I would practice doing what I just did by searching Nexaph Telegram-

You can find it on their website, in this community's vendor section, or HERE

 

[cmath]

Do you know the reason why they know longer report on SNP?

 

[Skidude]

Do you know the reason why they know longer report on SNP?

I think there was drama about potential doxing or something- i honestly do not pay attention/buy into most of the "As the Peptide world turns" drama...

 

[Ted R]

Hi, I’m relatively new to using Retatrutide—I previously used Zepbound. I currently have an unopened 6mg kit, but I haven’t used it yet because I’m unsure how to confirm whether my specific batch has already been tested or if I need to conduct my own test to verify the COA (Certificate of Analysis).

Someone shared a link to the STG Telegram group, but I find it a bit overwhelming and difficult to navigate. I’ve been trying to figure out whether my batch has existing test results, and I don’t want to spend money on a test if it’s already been done.

My main questions are:

How do I check if my specific batch has already been tested?

I got my batch from Nexaph—what abbreviation is typically used for this vendor in the community?

I’ve already purchased everything I think I need (insulin syringes, gloves, alcohol pads, filters, BAC water, etc.), but I haven’t done any injections yet because I want to be 100% sure of what I’m putting into my body.

Should I test this current batch myself, or would it be safer/better to order a batch that’s already been widely tested and verified by the community?

I’d really appreciate any help or guidance from those with more experience. Thank you!

Also, I know that the QR code shows the vendors test, but it seems to be agreed-upon most people that you can’t trust those tests

Hi, I’m relatively new to using Retatrutide—I previously used Zepbound. I currently have an unopened 6mg kit, but I haven’t used it yet because I’m unsure how to confirm whether my specific batch has already been tested or if I need to conduct my own test to verify the COA (Certificate of Analysis).

Someone shared a link to the STG Telegram group, but I find it a bit overwhelming and difficult to navigate. I’ve been trying to figure out whether my batch has existing test results, and I don’t want to spend money on a test if it’s already been done.

My main questions are:

How do I check if my specific batch has already been tested?

I got my batch from Nexaph—what abbreviation is typically used for this vendor in the community?

I’ve already purchased everything I think I need (insulin syringes, gloves, alcohol pads, filters, BAC water, etc.), but I haven’t done any injections yet because I want to be 100% sure of what I’m putting into my body.

Should I test this current batch myself, or would it be safer/better to order a batch that’s already been widely tested and verified by the community?

I’d really appreciate any help or guidance from those with more experience. Thank you!

Also, I know that the QR code shows the vendors test, but it seems to be agreed-upon most people that you can’t trust those test.

Click to expand...

There is a Nexaph Third Party Test server on Telegram, just not on STG any longer. DM Michelle @fit_curious and ask for an invite to join that server. The TPT report you are looking for is available there, and you will want to make sure you read the TPT report before you recon and pin as it tested out a good bit overfilled.

 

[Skidude]

There is a Nexaph Third Party Test server on Telegram, just not on STG any longer. DM Michelle @fit_curious and ask for an invite to join that server. The TPT report you are looking for is available there, and you will want to make sure you read the TPT report before you recon and pin as it tested out a good bit overfilled.

 

[Ted R]

View attachment 6513

22% overfilled!

 

[Rodboyjr]

Absolutely always question vendor provided testing.

The one caveat would be that on mass tested vendors (those that many users test), especially with the type of packaging that mitigates mistaken product delivery, your risk level is less than ordering from a random, non tested, non labeled.

It is up to you to decide your risk.

That batch is from vendor post test:

Jano from Vendor

View attachment 6504

This is from 3rd party testing server on SNP/Nexaph site:

Jano Result 3rd party

STG no longer supports/reports on Nexaph

View attachment 6505

The only way to be 99.9% sure is test it yourself, but it appears to be a reasonable bet that you are good to go.

I would practice doing what I just did by searching Nexaph Telegram-

You can find it on their website, in this community's vendor section, or HERE

Thank you this was very helpful Information! I’m guessing 2.5 pence must mean pretty close to a 3P testing result

 

[Rodboyjr]

There is a Nexaph Third Party Test server on Telegram, just not on STG any longer. DM Michelle @fit_curious and ask for an invite to join that server. The TPT report you are looking for is available there, and you will want to make sure you read the TPT report before you recon and pin as it tested out a good bit overfilled.

Thanks for this. I’m going to add Michelle on telegram

 

[Rodboyjr]

View attachment 6513

Was this from the group that Ted R mentioned?

 

[Skidude]

Was this from the group that Ted R mentioned?

I do not know, this is from 3rd party testing on SNP/Nexaph Telegram

 

[Ted R]

Was this from the group that Ted R mentioned?

Yes it was