would this be acceptable? https://www.undergroundsupply.shop/product/ga-glycerin-bac-acetic-acid-mdv-10ml/
Reconstituting agent for Cagrilintide
- Thread starter Christine S
- Start date
- Status
Can't see it, it takes me to limit by the owner web page. You can also use white vinegar as AA water. That being said, I'm not sure how well it would be tolerated by fragile peptides.dndgeek said:
Does anyone knows where one can get sterile acetic acid for this? Also has anyone done lowering pH? Approximately how much acetic acid to lets say 10mg cagri + 1ml BAC?
FRMN01 said:
My concerns with acetic acid:
1) Making sure it is pharma quality for injection
2) Stays sterile or is for single use
So I just used BAC water and it looked fine to me. Most people just use BAC water only too.
A lower pH of 4 for the end of the line (reconned solution) isn't very important, per some here.
Reconned HGH looks way more fragile than cagri, tirz, etc.
Calm Logic said:
I just ordered some from Amazon. Hope it’s good enough. I also bought some pH paper to test the pH. My BAC from CN was 6.0ish so already a little acidic . I added maybe 1-3 units in of acidic acid into a 10mL BAC water. Just kept adding drops until I got around a pH of 5 then added my cagri. Final pH was somewhere between a 4 and 5. No way to know if it’s working properly until we see the scale I guess?? Took my first shot a few days ago. No real side effects yet.FRMN01 said:
Acetic Acid 0.6%10ml- 1Pack | Ultra Clean | Research use only: Amazon.com: Industrial & Scientific
Acetic Acid 0.6%10ml- 1Pack | Ultra Clean | Research use only: Amazon.com: Industrial & Scientific
a.co
In my research of Cagri the tiniest amount of AA with BAC evidenced a 4pH much most of the time. After a year of Cagri use, I was comfortable with risk of 5pH as well. I've cycled off Cagri since, as I am well into maintenance. I've gotten my AA( ACS reagent) from Carolina Supply. They have a great deal of chemical info on their site as well.
Thanksjanedoe said:
ThanksJellybelly54 said:
Jellybelly54 said:
In the future, I would be more worried about AA from Amazon markeplace than the ideal pH of cagri. It's more work anyway and for what risk vs. benefit analysis? (Not to mention that cagri is relatively optional compared to GLPs like reta.)
As mentioned before, AA from Carolina Supply:
https://www.carolina.com/specialty-chemicals-a/acetic-acid/FAM_841289.pr?srsltid=AfmBOorUD9X0ISyAfTso_uY9Rvpw92m0vA2P_Dcc96bRCtoS9tw-OcNv
Reminder to dilute if using 100% (glacial) AA, from Gemini:
quoted said:
What did you use to test ph ?JohnnyGobbs said:
Ph strips, which are very inexpensiveMadkate said:
Thanks 
So, I tested my recently reconstitued cagri this morning. First is BAC on it's own :
[Imported image pending local asset: attachments-1776082188141-webp.19874]
This is a little higher than I thought it would be on it's own. This looks like in the 7 to 8 range.
This is the reconstituted cagrilintide :
[Imported image pending local asset: attachments-1776082211463-webp.19875]
I thought both would test in this 5 to 6 range.
I tested these last night, but wanted to double verify in the morning. The cagri tested a little lower last night, but not much.
[Imported image pending local asset: attachments-1776082188141-webp.19874]
This is a little higher than I thought it would be on it's own. This looks like in the 7 to 8 range.
This is the reconstituted cagrilintide :
[Imported image pending local asset: attachments-1776082211463-webp.19875]
I thought both would test in this 5 to 6 range.
I tested these last night, but wanted to double verify in the morning. The cagri tested a little lower last night, but not much.
I just whipped up a batch with 50% AA and 50% BAC and got pH5. I then tested the AA by itself (0.6%) and that all on its own is showing pH4. Does anyone just skip the BAC and use straight 0.6% acetic acid?
This is the one I purchased as well as their PH strips. When I reconstituted the cagri with hospira, it was around a 6, so I did what I think was a tiny drop of the AA, and it was a solid 4. I did that last night and then did my first pin of .25mg alongside a pin of 1.25mg Reta -- not sure I will see any thing from that dose but wanted to try.Calm Logic said:
- Status
