Poll of the week 😅 BAC water: team more or less? (Tirz/Reta)

[Mara_aa]

I'm Team Less .

Only because the notion of injecting larger volumes kinda grosses me out, for some unknown reason.

So I do 1 mL BAC water in my 10 mg Reta vial and then inject 10 units (a nice small amount).

Adding you to the “small volume” list!

 

[Mara_aa]

I do the same thing as byefatlicia for exactly the same reason.

Adding you to the “reconstituted vial expiry”, thanks!

 

[HereKittyKitty]

I Have never had burning from any glp using bac.

Me either.

I vary my bac water volume. Depends on my dose and the mg of the vial. I prefer to inject less my current Tz dilution requires 0.4ml dose. I don't like it.

I am needlephobic. I don't want to push much through the syringe.

 

[Mara_aa]

I know many that have used it way beyond that arbitrary 28 days. Me included! It doesn't go bad it slightly degrades. So adjust 5 to 10% in dosage. 10 being on the extreme side of things.

That 5–10% tweak is a really helpful tip, I’ll keep it in mind

I’ll put myself in your same group. I do feel a bit more burning when it’s less diluted.

 

[Mara_aa]

Me either.

I vary my bac water volume. Depends on my dose and the mg of the vial. I prefer to inject less my current Tz dilution requires 0.4ml dose. I don't like it.

I am needlephobic. I don't want to push much through the syringe.

Adding you to the “small volume” list!!

 

[BNLFL]

Interesting idea, and to see what others do. Probably should've started a poll, but regardless. Right now, I'm pinning 6mg Reta out of a R24 vial, so I add 2.4ml BAC. That gives me 4 pins @6mg. I have bunch of different sizes. If I do a 60mg Reta, I'd add 3ml BAC, that gives me 10 doses at 30mg pins to equal the 6mg required.

 

[Maximus]

I Have never had burning from any glp using bac.

Same for me, never.

 

[MFGamesta]

I'm more of a 10 unit guy. I try to reconstitute so my dosage is 10 units, 20 units... Less confusing.

 

[CNCCurrency]

I'm more of a 10 unit guy. I try to reconstitute so my dosage is 10 units, 20 units... Less confusing.

I'm like that also, 10 units equal 1 mg. Keeps it simple especially when doing 8 different peps a day

 

[evilution]

I have R15 and first used 1ML of BAC and loaded up on 10 units. The second vial I added 3ML of BAC and loaded up with 30 units. Much easier to get closer to actual the larger the unit. A slight over or under with the 10 unit had a much bigger impact.

 

[FartfulCodger]

I always feel weird about injecting large volume. It somehow seems unnatural to inject 1 full cc of mostly water. But I used to be "team more" because I liked the idea of more accurate dosing. Then I realized that it probably doesn't matter all that much if you're off by 10% or so. You're going to have inaccuracy anyway based on overfill. So I'm more on "team less" now.

 

[Pinngo]

I go with whatever amount of BAC for the unit amount to end in a 0 or a 5. I don't want to be between tick marks on my insulin syringe. I prefer a smaller amount in general though, for whatever reason it's easier for my brain to deal/cope with injecting smaller unit amounts.

 

[WholesomeApril]

for Reta I’m probably team less water.

I don’t like to pin more that 40-50 units. Depending on my dosage i will adjust my water to accommodate this.

 

[Turbo-Farmer]

Got it, you’re now officially on my “reconstituted vial expiry tracking” list thanks!

You're on my list tracking list

 

[randompersonrandom]

I recon GLP-1's at 22 mg/ml, because I started with compound on a titration schedule of 2.2 mg (10 units) then 4.4 (20) and so on, and that's what I got used to, so it's easy for me to remember.

Only exception is Survo, which I stack in way smaller doses. I recon it so my dosage is 20 units.

KLOW I recon at 77mg (for the ghk-cu part)/12 ml. My dose is 34 units, and that's what it takes to not give me a painful bruise 12 hours later.

Epitalon, I like 10mg/ml so that 1 mg is 10 units.

 

[cheaperseeker]

Team less, so I don't have to recon as often.

For tirz, I recon to 0.5mg/1unit, which makes it easier to calculate the different doses my spouse and I take. I get 120 mg into my injection pen, and my dose is 20 units.

For KLOW, I take 5 units, which is 2mg of GHK-Cu and 0.4 mg of the others.

I mostly ignore the 28 day expiration thing, same as many others here. I think there was a whole thread on that a while back.

 

[Mara_aa]

I have R15 and first used 1ML of BAC and loaded up on 10 units. The second vial I added 3ML of BAC and loaded up with 30 units. Much easier to get closer to actual the larger the unit. A slight over or under with the 10 unit had a much bigger impact.

Adding you to the “more volume/better accuracy” list, thanks!!

 

[Mara_aa]

Interesting idea, and to see what others do. Probably should've started a poll, but regardless. Right now, I'm pinning 6mg Reta out of a R24 vial, so I add 2.4ml BAC. That gives me 4 pins @6mg. I have bunch of different sizes. If I do a 60mg Reta, I'd add 3ml BAC, that gives me 10 doses at 30mg pins to equal the 6mg required.

Adding you to the easier/logic dosing list, thanks!

 

[lessthanhalf]

I usually dilute them so a dose is 0.1ml, or somewhere near there , using 0.3ml syringes. Tirz I just dilute the same as the legit version as I started on it so I just kept it the same so it would be easier to work out doses so 60mg 2.4ml , but I am using dosing every second day so still a small amount of 0.18ml is 4.5mg. Using smaller volumes lets me use one syringe for 2 peptides, the only one that did weird things like go cloudy was mots c mixed with hgh, otherwise it seems to work and is half the number of syringes.

 

[Mara_aa]

Team less, so I don't have to recon as often.

For tirz, I recon to 0.5mg/1unit, which makes it easier to calculate the different doses my spouse and I take. I get 120 mg into my injection pen, and my dose is 20 units.

For KLOW, I take 5 units, which is 2mg of GHK-Cu and 0.4 mg of the others.

I mostly ignore the 28 day expiration thing, same as many others here. I think there was a whole thread on that a while back.

Adding you to the easier/less hassle list, thanks!

Just to make sure I understood…

If you’re reconstituting your 120 mg with 2.4 ml of BAC into the injection pen, does the pen still dose accurately if it’s not completely filled during refilling (e.g. less than 3 ml in a 3 ml pen)?