你们每个月都买BAC吗?

Status
Not open for further replies.
brisket said:
Calibrate your extrusion multipliyer (aka flow rate). Without knowing your printer, slicer, and printer firmware, that is about all i can provide
Banbu A1. I supposedly calibrate before each print. Seems to take forever to go through its little routine. Firmware is current. And the print plate is intermittently cleaned with dish soap and cleaned every time with isopropyl alcohol.
 
Ladylaw said:
Banbu A1. I supposedly calibrate before each print. Seems to take forever to go through its little routine. Firmware is current. And the print plate is intermittently cleaned with dish soap and cleaned every time with isopropyl alcohol.
I'm not familiar with those printers, but I guarantee you that the flow rate is not calibrated before each print. You will have to find someone familiar with that printer type.
 
fetefille said:
I *think* they mean the 2 types of Bacteriostatic water: Bacteriostatic water with the pink top that uses alcohol and Bacteriostatic sodium chloride water with the green top that uses NaCl & alcohol as the agents. Pfizer makes both versions.

I could be wrong 😑 lol
Yes. This exactly! Both NaCl and NaHCO₃ (sodium bicarbonate/baking soda) are salts but I am assuming the bac water with sodium has NaCl. But either way , bottom line is that we don't order either for use with GLPs. We order the one with only benzyl alcohol.
 
lauranyc77 said:
Yes. This exactly! Both NaCl and NaHCO₃ (sodium bicarbonate/baking soda) are salts but I am assuming the bac water with sodium has NaCl. But either way , bottom line is that we don't order either for use with GLPs. We order the one with only benzyl alcohol.
I’ve used the NaCl with no problem, just happen to buy it by mistake when I first started. People use the big bottle of bicarbonate to change the ph of peps, mostly NAD+ if it’s not “buffered.” (Idk what all they use to buffer it.)

Non bac NaCL is used with tox, though you can use the bac kind, just heard it’s spicy.
 
Ladylaw said:
A lot of vendors will sell 3ml vials of BAC in kits. Many people stick their nose up at this option. My vendor includes a kit of yellow cap vials with each peptide order as a freebie. I love them. They’ve been tested by Jano and the results have been great. I routinely buy kits of these little vials from others who refuse to use them. I usually pay $5/kit plus shipping. Unfortunately sellers are starting to wise up. I paid $10 per kit today for 6 kits.

View attachment 5239
I've been using Bac Water from XCE back before they disappeared and have had zero issues. Will happily re-up with QSC when I need more.
 
clayd said:
i'm not an expert so don't listen to me. but for what it's worth, my understanding is that the potential issue with bac water is that the benzyl alcohol part that is the actual sterilizing agent might evaporate over time through the puncture hole in the cap. and refrigerating it might actually accelerate this process. that's why bac is supposed to be stored at room temp.

i use my bac for far too long per guidelines but i'm not worried. seems like stuff evaporating through a tiny puncture hole is less risky than putting chinese powder in your belly.
Benzyl alcohol will not evaporate. It evaporates much slower than water. Water will be gone long before BA evaporates.
 
lauranyc77 said:
Are Pfizer and Hospira pretty much the same? Should you avoid the ones that have sodium in it?
Yes same. The one with sodium is called isotonic and is very close to blood salt level. Less of a shock to the system. And the mannitol filler in your Tirz, is like sugar, so your injection mix is close to an IV drip. And the sodium version also has benzyl 0.9%. I was buying 3ml bac vial on Amazon from Stat Lab 10 x 3 ml for $30 to reduce waste, and was planning to begin filtering them. What a pain, time, risk and $$. I used the unfiltered Stat Lab for up to 9 weeks before my first ISR. I decided that Hospira NaCL at $3-4 per vial is a good bet to use the same bac vial for 45+ days without filtering, until my next ISR.... Am not an RN, and understand filtering is probably a better choice.
 
chmuse said:
That was 100% a joke. It's basically pure ethanol- as in, liquor. Do NOT do it.
I am unfortunately very familiar with consuming Everclear from my college days - not through the veins though, just through the mouth

Its essentially grain alcohol or very high proof
 
lauranyc77 said:
I am unfortunately very familiar with consuming ethanol from my college days - not through the veins though, just through the mouth
Right! 😆
 
lauranyc77 said:
I am unfortunately very familiar with consuming Everclear from my college days - not through the veins though, just through the mouth

Its essentially grain alcohol or very high proof
Years ago, I made edibles for me and my girlfriend while at her house party. (We snuck the toaster oven into her room and made just enough for the two of us because we were stingy early 20's and already drunk enough to think no one would smell it if we opened the window.) I left the room and was greeted by someone handing out shots, and me being me, I don't say no to alcohol. Grabbed it and swallowed it down without a single question.

Everclear. It was everclear. That was not a fun night.
 
chmuse said:
Years ago, I made edibles for me and my girlfriend while at her house party. (We snuck the toaster oven into her room and made just enough for the two of us because we were stingy early 20's and already drunk enough to think no one would smell it if we opened the window.) I left the room and was greeted by someone handing out shots, and me being me, I don't say no to alcohol. Grabbed it and swallowed it down without a single question.

Everclear. It was everclear. That was not a fun night.
Oh my God!!!!Thank God you lived AND learned!!😄😄😄
 
I buy 3 10ml vials at a time and I've run it for at least 60 days whether I use it for glp1s, high, ostarine, bpc157, whatever.... I toss the opened bac after 2 months. Supposedly 28 days but they also say antibiotic pills expire after 3 or 6 months but I have 4 year old amoxicillan works fine... some folks use bac for 90 days, I do 60 it's cheap.
 
chmuse said:
Years ago, I made edibles for me and my girlfriend while at her house party. (We snuck the toaster oven into her room and made just enough for the two of us because we were stingy early 20's and already drunk enough to think no one would smell it if we opened the window.) I left the room and was greeted by someone handing out shots, and me being me, I don't say no to alcohol. Grabbed it and swallowed it down without a single question.

Everclear. It was everclear. That was not a fun night.
I used to juggle fire torches in high school and spit fire. Everclear was always preferred but if we couldn't get any we had to resort to kerosene.
 
Airborne Daddy said:
I buy 3 10ml vials at a time and I've run it for at least 60 days whether I use it for glp1s, high, ostarine, bpc157, whatever.... I toss the opened bac after 2 months. Supposedly 28 days but they also say antibiotic pills expire after 3 or 6 months but I have 4 year old amoxicillan works fine... some folks use bac for 90 days, I do 60 it's cheap.
Where do you get your's from?
 
zpped said:
I used to juggle fire torches in high school and spit fire. Everclear was always preferred but if we couldn't get any we had to resort to kerosene.
上次我们玩喷火游戏,我朋友的胡子被烧着了。😬

我以前的绝活是用酒精点燃别人,然后再擦掉。高浓度酒精(Everclear)温度太高,不适合这么做,通常要用70%的酒精,即使是90%的对某些人来说也太烫了。
 
Iamnew2this said:
你的那些是从哪里买的?
千万别在亚马逊上买背胶。

这里有个不错的渠道可以买到少量的赫斯皮拉肽: https://www.peptidetest.com/shop
 
chmuse said:
上次我们玩喷火游戏,我朋友的胡子被烧着了。😬

我以前的绝活是用酒精点燃别人,然后再擦掉。高浓度酒精(Everclear)燃烧温度太高,不适合这么做,通常要用70%的酒精,即使是90%也太高了。
 
Status
Not open for further replies.

Members online

No members online now.

Forum statistics

Threads
4,434
Messages
86,405
Members
7,877
Latest member
jhonpdr
Back
Top