BioHealthAus
GLP-1 Apprentice
I will look at these more closely. They look good at a quick glance. Thanks.Sid the SeaGull said:
I’m new to peptide pens. Please help me.
- Thread starter DJ1245
- Start date
- Status
BioHealthAus
GLP-1 Apprentice
These Gansulin pens, what cartridges etc do they take? They look fantastic.
Sid the SeaGull
GLP-1 Enthusiast
Standard 3ml ,also on AE , there is another thread that has AE shops with verified sterile carts . Ill try to find the link laterBioHealthAus said:
Sid the SeaGull
GLP-1 Enthusiast
It was further up this post , as mentioned by calm logic , some tests were done on Ali and were positive at that point in time .Calm Logic said:
BioHealthAus
GLP-1 Apprentice
Thanks so much, I have heaps of standard cartridges. 
joseblo
GLP-1 Enthusiast
Gansulin pens are expensive (esp on AliEx), but great. The Gensu2 in particular is probably the best of the auto-injectors (spring loaded not manual).BioHealthAus said:
Look on the LS_Testing server (in vendors here) they've done a couple of 100+ pen group buys in US/E at ~$35ea +$10 shipping, which is a great deal!
joseblo
GLP-1 Enthusiast
There are so many versions of the V2 (and now V3?) pens that it's really unpredictable.Calm Logic said:
They have different number of ridges on the selector, better and worse printing on the selector dial, square vs rounded edges on the push button, some with labels showing units on the cart holder, others without. Some of these are better and worse for reliability and smoothness, but often the pictures of what is being sold don't exactly match what is delivered, which makes distinguishing them a crapshoot anyway. I own 5 different pairs of V2 and they appear to be 5 different pens. For $15-20 ea I want recommend splurging for a something better, but they come in such pretty colors!
At the same time, all of them have worked OK and only one was repeatably off by a unit. One of them was a bit sticky and some teflon spray fixed it. YMMV!
My once beloved Bird Pens appear to be no more. It's Gensu2 or bust.
pughster25
GLP-1 Apprentice
I've just had 6 in the last GB, defo real good quality, all 6 tested accurate several times, i also have some V2 from ali which i didn't like that much, felt cheap and real easy to under dose as the plunger slips if pressed a little too hardjoseblo said:
desinr-gal
GLP-1 Specialist
I am using the V1, because it has a covered cap. The V2 are open. Sometimes they are hard to push, but I am now certain that is the Cartridge stoppers that are hard, which causes this. I like the V1 because I want to control the rate of the injection. Spicy can be managed with slower injection, and I may want to change locations if I hit a nerve. MIne are solid, and beautiful colors which allow me to easily identify the peps inside. I have not ever tested their accuracy..joseblo said:
Gorby2025
GLP-1 Novice 🚫No Source Discussion🚫
I purchased and received some cartridges from two of the vendors above: Heaven Island and Summer Xia Choice. In both cases the pouches for all cartridges do not have the sterilization indicator change color - neither "EO" nor "STEAM" - which to me means they are not sterile, right? Either the EO indicator should be yellow (changed from pink) or Steam indicator should be black (changed from blue) if they were actually sterilized as advertised. When these vendors were tested previously, do we know if the indicators were actually showing that?Calm Logic said:
Calm Logic
GLP-1 Specialist
From what I have heard, that happens and they are still fine.
There is one method of sterilization that doesn't show up. Ozone, I guess. But there are other reasons (supposedly) that it's okay if nothing shows on the indicators.
There is one method of sterilization that doesn't show up. Ozone, I guess. But there are other reasons (supposedly) that it's okay if nothing shows on the indicators.
obeyGLP
Recently Joined 🚫No Source Discussion🚫
I just wanted to drag this old post back up. The test group you’re talking about, was it on FPPG? Cause I was just going through one test groups results (May 27/25) and Heavens Island and Dunyu were NOT sterile.Calm Logic said:
I’m mad at myself because I bought Heavens Island and HDRSMETMED based on seeing elsewhere that they’d passed some third party testing, and now I come across these actual results.
RetCurious
GLP-1 Enthusiast
A search for "LS_Testing server" only brings up your post, may I get a clue?joseblo said:
Abrakebabra
GLP-1 Apprentice
Just search "LS Testing" and you'll find plenty of infoRetCurious said:
Or just click here... [archived internal link]
RetCurious
GLP-1 Enthusiast
Thank you for the link.
Is my search broken?
Is my search broken?
Abrakebabra
GLP-1 Apprentice
You've added an underscore...RetCurious said:
RetCurious
GLP-1 Enthusiast
Thanks again,
Doh!Abrakebabra said:
joseblo
GLP-1 Enthusiast
I'll mention that due to the many recent Discord nukings, it's quite a bit more difficult to get into test and other servers right now. It's unfortunate, and this week is slightly better than last week, but this month is much worse than last month. It just takes learning and patience... such is the world of grey. If it seems to be too good to be true, it probably is! If it was easy, it would be /reddit.
- Status
