Desiccant Packs in your containers.

[Whiynot20026]

Do you all use Desiccant in your containers or your storage areas for your peptides. If so which ones brand do you recommend and best way to use them.

Bill

 

[CharmanderInDisguise]

I just get whatever bulk-pack is cheapest on Amazon.

I 3d printed 3ml vial-sized containers for the desiccant and I put it into the "vials" then into the storage container that I have (32oz Hydrapeak with 3d printed dividers).

I will say, I wasn't using desiccant for a while. As long as I wasn't opening and closing the freezer a whole bunch, I never noticed any moisture build-up in my pep vials.

 

[randompersonrandom]

I use them. I keep my vials in thermos containers in the freezer, and some of them are not likely to be opened for six years or more. Thirty vials go in, a handful of dessicant packs go on top, lid goes on, and it goes at the bottom of the chest freezer.

 

[Grogu]

I just get whatever bulk-pack is cheapest on Amazon.

I 3d printed 3ml vial-sized containers for the desiccant and I put it into the "vials" then into the storage container that I have (32oz Hydrapeak with 3d printed dividers).

I will say, I wasn't using desiccant for a while. As long as I wasn't opening and closing the freezer a whole bunch, I never noticed any moisture build-up in my pep vials.

The vial sized desiccant holders sound really cool, but I wouldn’t want to take up the space that a vial could be using. So I just throw a couple of packets in my Hydapeaks. I also wasn’t using desiccant for a while and didn’t notice any moisture. I thought Hydrapeaks were air tight, but I guess not.

 

[nitetrak]

I bought desiccant on amazon, $6.99 for a large amount, I have no idea what I'm going to do with the rest. It's orange but turns green when it's sucked up enough water, then you put it in the oven or microwave, as it dries it turns orange again so it is reusable.

I have hydropeak with silicon inserts, instead of using a desiccant holder and wasting vial space, I just poured it over the top, but don't cover completely because vials might break when lid is closed. It looks messy but it's at least functional.

 

[BNLFL]

I throw a few in my storage cases in the freezer. I got that same big pack on Amazon.

 

[Pepperboi]

I 3d printed some vials that I feel with dessicant beads and throw a few in the empty slots of my hyrdapeak. It is overkill, I know, but it is something.