BAC water that’s reliable

[AgingRegenDamaged]

View attachment 20310

1ml BA to 99ml of sterile water = 1%. The 100mL BA is enough for 10,000 mL = 10L = 2.2gallons.

This is the route I'm going to go because I just don't want to give my $ to Pfizer (ie. Hospira).

Same reason I will be making my own distilled water

For the exact preparation and storage method I was thinking of this technique:

Ingredients: x gallons of distilled water from walmart, target etc. Litre or larger Bottle of Benzyl Alcohol, Dish Soap.

Equipment: One stainless steel or Pyrex saucepan. One funnel. Extremely clean sink.

1. Clean a small already visually clean saucepan in distilled water and washing up liquid using gloves and then with a 70% solution of benzyl alcohol and 30% water.

2. Fill saucepan 90% full with and boil distilled water twice with the funnel on the stove to decontaminate saucepan fully that additionally is poured out each time into a new glass jar or bottle / lid waiting in the sink for storage of finished compound.

3. Boil 990ml in the now fully decontaminated and mostly sterile saucepan with a lid, allow it to rapidly cool in the freezer.

4. Add the 10 ml of benzyl alcohol into the aforementioned glass jar and then finally adding the boiled, distilled water and store in the fridge for a total of 1 litre bac water.

 

[derekd419]

No tirz? May change your mind

The year everything changes

 

[trojanpeptide]

Same reason I will be making my own distilled water

For the exact preparation and storage method I was thinking of this technique:

Ingredients: x gallons of distilled water from walmart, target etc. Litre or larger Bottle of Benzyl Alcohol, Dish Soap.

Equipment: One stainless steel or Pyrex saucepan. One funnel. Extremely clean sink.

1. Clean a small already visually clean saucepan in distilled water and washing up liquid using gloves and then with a 70% solution of benzyl alcohol and 30% water.

2. Fill saucepan 90% full with and boil distilled water twice with the funnel on the stove to decontaminate saucepan fully that additionally is poured out each time into a new glass jar or bottle / lid waiting in the sink for storage of finished compound.

3. Boil 990ml in the now fully decontaminated and mostly sterile saucepan with a lid, allow it to rapidly cool in the freezer.

4. Add the 10 ml of benzyl alcohol into the aforementioned glass jar and then finally adding the boiled, distilled water and store in the fridge for a total of 1 litre bac water.

The better way is to purchase sterile water and just add the benzoyl alcohol. I think 100mL costs about $5 or so. 100mL container, everything is sterile. Light a couple candles, open the container, inject 0.9 mL into the container. You can then use another syringe to inject this solution into small sterile vials (5ml or 10 ml) and store them in the freezer until needed.

Although not 'suitable for injection', it is sterile and pyrogen free. There is no endotoxin, and no fkn around with saucepans. That 250mL volume is only $4. I suggest this method.

 

[WeezinDaJuice]

Per order. So I did two orders today. Got both tracking numbers.

As said before, free shipping if you hit $50, which is easy to do.

One order (with promo code "glp1forum" for the non-Hospira items):

View attachment 20243

Now up $1.50/bottle to $11.49 and on back order. Pretty soon 4 bottles will fulfill the $50 free shipping threshold, but fully expect it to be $0.04 short.

 

[trojanpeptide]

I used 2.25mL Benzyl alcohol to 250mL sterile water (USP) and filled as many sterile 5mL bottles I had kicking around. I didn't tear off the seal to the bottle, just poked a hole thru it using the syringe. Lots of wiping with IPA. I placed the vials in the -20°C freezer.

I used about half the bottle and the rest I checked the pH = 5.08 before tossing it out.

If you look close, you can see a weird sticker that I put on the benzyl alcohol. They came with the 5mL sterile vials; wish there had been more.

Anyhow, I got plenty of BAC now. I hit a mg (10U) of KPV afterwards, no sting or anything.

 

[skeptick]

Let me know how those 29g work out. It was my wife squawking about the 30g needles, but they were just a pack of 30 I got from Amazon before I knew better or joined.

I've used 29g and also 27g many times, even after going thru rubber stoppers to draw with and then subq injecting, with no ill effects and little to no discomfort and not anything I consider pain. But then I'm mostly bullet proof. YMMV...